This product is covered by ACI's Five (5) Year Limited Warranty. Learn more
Product overview
100 Ohm (Three Wire) RTD, Pipe Mount, 10' Plenum Cable
Application
- Cooling Coils
- Heating Coils
- Hot Water Systems
- Chilled Water Systems
- Hydronic Heating Systems
- Chillers
Product specifications
Sensor Type | Sensor Curve:
Platinum RTD | PTC (Positive Temperature Coefficient)
Number Sensing Points:
One
Number Wires:
A/100-2W-PM Series and A/1K-2W-PM Series: Two (Non-Polarity Sensitive)
A/100-3W-PM Series and A/1K-3W-PM Series: Three (Polarity Sensitive)
Sensor Output @ 0ºC (32ºF):
A/100-xW-PM Series: 100 Ohms nominal | A/1K-xW-PM Series: 1000 Ohms nominal
Sensor Accuracy:
+/- 0.06% Class A (Tolerance Formula: +/- ºC = (0.15ºC + (0.002 * |t|))
where |t| is the absolute value of Temperature above or below 0ºC in ºC)
-40ºC (-40ºF): +/- 0.23ºC (+/- 0.414ºF) | 0ºC (32ºF): +/- 0.15ºC (+/- 0.27ºF)
200ºC (392ºF): +/- 0.55ºC (+/- 0.99ºF)
Din Standard | Temperature Coeffcient:
DIN EN 60751 (IEC 751) | 3850 ppm / ºC
Platinum RTD Stability:
+/- 0.03% after 1000 Hours @ 300ºC (572ºF)
Platinum RTD Response Time (63% Step Change):
8 Seconds nominal
Self-Heating | Maximum Operating Current:
100 Ohm RTD: 7 mW/ºC (Still Air) | 5 mA | 1K Ohm RTD: 4mW/ºC (Still Air) | 3 mA
Pipe Mount Sensor Enclosure Material:
Brass
Pipe Sizes Accepted:
½” (12.7mm) to 1” (25.4mm)
Operating Temperature Range:
-40 to 200ºC (-40 to 392ºF)
Storage Temperature Range:
-40 to 85ºC (-40 to 185ºF)
Operating Humidity Range:
10 to 95% RH condensing
Lead Length | Conductor Size:
24” (61cm) | 22 AWG (0.65mm)
Lead Wire Insulation | Wire Rating:
Etched Te on (PTFE) Colored Leads | MIL-W-16878/4 (Type E)
Conductor Material:
Silver Plated Copper
Product Dimensions:
1.10” (27.9mm) x 0.375” (9.53mm)
Product Weight:
0.06 lbs. (27.22g)
Agency Approvals:
CE, RoHS, WEEE
