This product is covered by ACI's Five (5) Year Limited Warranty. Learn more
Product overview
10,000 Ohm Thermistor (Type II), Pipe Mount, 6' Plenum Cable, NIST Cert
Application
- Cooling Coils
- Heating Coils
- Hot Water Systems
- Chilled Water Systems
- Hydronic Heating Systems
- Chillers
Product specifications
Sensor Type | Sensor Curve:
Thermistor | Non-Linear, NTC (Negative Temperature Coefficient)
Number Sensing Points:
One
Number Wires:
Two (Non-Polarity Sensitive)
Nominal Thermistor Resistive Output @ 77°F (25°C) (Lead Wire Colors):
A/1.8K: 1.8K ohm nominal | (Red/Yellow)
A/3K: 3K ohm nominal | (White/Brown)
A/AN (Type III): 10K ohm nominal | (White/White)
A/AN-BC: 5.238K ohm nominal | (White/Yellow)
A/CP (Type II): 10K ohm nominal | (White/Green)
A/CSI: 10K ohm nominal | (Green/Yellow)
A/10KS: 10K ohm nominal | (White/Blue)
A/10K-E1: 10K ohm nominal | (Gray/Orange)
A/20K: 20K ohm nominal | (Brown/Blue)
A/50K: 50K ohm nominal | (Brown/Yellow)
A/100KS: 100K ohm nominal | (Black/Yellow)
Accuracy 0-70ºC (32-158ºF):
+/-0.2ºC (+/-0.36ºF) except A/10K-E1 Series: +/-0.3ºC (+/-0.54ºF);
A/1.8K Series: +/- 0.5ºC @ 25ºC (77ºF) and (+/-1.0ºC) (+/-1.8ºF)
Power Dissipation Constant:
3 mW/ºC except A/1.8K Series: 1 mW/ºC | A/10K-E1 Series: 2 mW/ºC
Response Time (63% Step Change):
20 Seconds nominal
Pipe Mount Sensor Enclosure Material:
Brass
Pipe Sizes Accepted:
½” (12.7mm) to 1” (25.4mm)
Operating Temperature Range:
-40 to 150ºC (-40 to 302ºF)
Storage Temperature Range:
-40 to 85ºC (-40 to 185ºF)
Operating RH Range:
10 to 95% RH, Condensing
Lead Length | Conductor Size:
24” (61cm) | 22 AWG (0.65mm)
Lead Wire Insulation | Wire Rating:
Etched Te on (PTFE) Colored Leads | MIL-W-16878/4 (Type E)
Conductor Material:
Silver Plated Copper
Product Dimensions:
1.10” (27.9mm) x 0.375” (9.53mm)
Product Weight:
0.05 lbs. (22.68g)
Agency Approvals:
CE, RoHS, WEEE
