Thermistors Rigid Averaging

This product is covered by ACI's Five (5) Year Limited Warranty. Learn more

Product overview

10,000 Ohm Thermistor (Type II), Rigid Probe Averaging, 48", NEMA 4X Enclosure

Application

  • Roof Top Units
  • Mixed Air/Discharge/Supply Air Temperature Monitoring
  • Data Centers
  • Hospitals

Product specifications

Sensor Type:
Thermistor
Sensor Curve:
Non-Linear, NTC (Negative Temperature Coefficient)
Number Sensing Points:
Four
Number Wires:
Two (Non-Polarity Sensitive)
Sensor Output @ 25ºC (77ºF):
A/1.8K: 1.8KΩ nominal | (Red/Yellow) A/3K: 3KΩ nominal | (White/Brown) A/AN (Type III): 10KΩ nominal | (White/White) A/AN-BC: 5.238KΩ nominal | (White/Yellow) A/CP (Type II): 10KΩ nominal | (White/Green) A/CSI: 10KΩ nominal | (Green/Yellow) A/10KS: 10KΩ nominal | (White/Blue) A/10K-E1: 10KΩ nominal | (Gray/Orange) A/20K: 20KΩ nominal | (Brown/Blue) A/50K: 50KΩ nominal | (Brown/Yellow) A/100KS: 100KΩ nominal | (Black/Yellow)
Accuracy 0-70ºC (32-158ºF):
+/-0.20ºC (+/-0.36ºF)
Response Time (63% Step Change):
10 Seconds nominal
Power Dissipation Constant:
4 mW/ºC except A/1.8K Series = 2 mW; A/100KS Series: 6 mW
Enclosure Temperature Rating:
“-GD” Enclosure: -40 to 115ºC (-40 to 239ºF), Galvanized Steel, NEMA 1 (IP10) “-PB” Enclosure: -30 to 100ºC (-22 to 212ºF), ABS Plastic, UL94-5VB, Plenum Rated “-BB” Enclosure: -40 to 115ºC (-40 to 239ºF), Aluminum, NEMA 3R (IP14) “-4X” Enclosure: -40 to 70ºC (-40 to 158ºF), Polystyrene Plastic, NEMA 4X (IP66)
Storage Temperature Range:
-40 to 85ºC (-40 to 185ºF)
Operating Humidity Range:
-40 to 85ºC (-40 to 185ºF)
Probe Material:
304 Stainless Steel
Probe Diameter:
0.250” (6.35mm)
Fitting Material | Flammability Rating:
Polyamide 66 (High Performance Nylon) | UL94-HB
Foam Pad Material | Flammability Rating:
Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C
Lead Length | Conductor Size:
12” (30.5cm) | 22 AWG (0.65mm)
Lead Wire Insulation | Wire Rating:
Etched Teflon (PTFE) Colored Leads | MIL-W-16878/4 (Type E)
Conductor Material:
Silver Plated Copper
Agency Approvals:
CE, RoHS2, WEEE