This product is covered by ACI's Five (5) Year Limited Warranty. Learn more
Product overview
100 Ohm (Three Wires) RTD, Strap On, Plastic Enclosure
Application
- Chilled Water Systems
- Hot Water Systems
- Boilers
- Pumps
- Compressor
- Chillers
Product specifications
Sensor Type | Sensor Curve:
Platinum RTD | PTC (Positive Temperature Coefficient)
Number Sensing Points:
One
Number Wires:
A/100-2W-S Series and A/1K-2W-S Series: Two (Non-Polarity Sensitive)
A/100-3W-S Series and A/1K-3W-S Series: Three (Polarity Sensitive)
Sensor Output @ 0ºC (32ºF):
A/100-xW-S Series: 100 Ohms nominal | A/1K-xW-S Series: 1000 Ohms nominal
Sensor Accuracy:
+/- 0.06% Class A (Tolerance Formula: +/- ºC = (0.15ºC + (0.002 * |t|)) where |t| is the absolute value of Temperature above or below 0ºC in ºC)
-40ºC (-40ºF): +/- 0.23ºC (+/- 0.41ºF) | 0ºC (32ºF): +/- 0.15ºC (+/- 0.27ºF)
93ºC (200ºF): +/- 0.34ºC (+/- 0.61ºF)
Din Standard | Temperature Coeffcient:
DIN EN 60751 (IEC 751) | 3850 ppm / ºC
Platinum RTD Stability:
+/- 0.03% after 1000 Hours @ 300ºC (572ºF)
Platinum RTD Response Time (63% Step Change):
30 Seconds nominal
Self-Heating | Maximum Operating Current:
100 Ohm RTD: 7 mW/ºC (Still Air) | 5 mA
1K Ohm RTD: 4mW/ºC (Still Air) | 3 mA
Enclosure Specifications (Material, Operating Temperature, NEMA Ratings)::
A/100/1K-S-GD: Galvanized Steel, -40 to 93ºC (-40 to 200ºF), NEMA 1 (IP 10)
A/100/1K-PB: ABS Plastic, -30 to 85ºC (-22 to 185ºF), UL94-HB, Plenum Rated
A/100/1K-S-4X: Polystyrene Plastic, -40 to 70ºC (-40 to 158ºF), UL94-V2, NEMA 4X (IP 66)
Storage Temperature Range:
-40 to 85ºC (-40 to 185ºF)
Operating Humidity Range:
10 to 95% RH, non-condensing
Pipe Sizes Accepted:
A/100/1K-S-XX: 1 1/4” (32mm) to 4” (100mm) | A/100/1K-S10-XX: 2” (50mm) to 10” (250mm)
Foam Pad Material | Flammability Rating:
Neoprene/EPDM/SBR Polymer | UL94-HF1; MIL-R-6130C; FMVSS-302
Lead Length | Conductor Size:
14” (35.6cm) | 22 AWG (0.65mm)
Lead Wire Insulation | Wire Rating:
Etched Teflon (PTFE) Colored Leads | MIL-W-16878/4 (Type E)
Conductor Material:
Silver Plated Copper
Product Weight:
A/100/1K-XX-GD: 0.81 lbs. (0.37kg) | A/100/1K-XX-PB: 0.41 lbs. (0.19kg);
A/100/1K-XX-4X: 0.56 lbs. (0.25kg)
Agency Approvals:
CE, RoHS, WEEE
