This product is covered by ACI's Five (5) Year Limited Warranty. Learn more
Product overview
100 Ohm (Two Wires) RTD, Wall Plate, Stainless Steel
Application
- Space Temperature Sensing
- Decorative Wall Sensor Applications
- Office Buildings
- Hospitals & Schools
- Colleges
- OEM Opportunities
Product specifications
Sensor Type:
Platinum RTD
Sensor Curve:
PTC (Positive Temperature Coe cient)
Number Sensing Points:
One
Number Wires:
A/100-2W-xP Series and A/1K-2W-xP Series: Two (Non-Polarity Sensitive)
A/100-3W-xP Series and A/1K-3W-xP Series: Three (Polarity Sensitive)
Sensor Output @ 0ºC (32ºF):
A/100-xW-xP Series: 100 Ohms nominal
A/1K-xW-xP Series: 1000 Ohms nominal
Sensor Accuracy:
+/- 0.06% Class A (Tolerance Formula: +/- ºC = (0.15ºC + (0.002 * |t|)) where |t| is the absolute value of Temperature above or below 0ºC in ºC)
-40ºC (-40ºF): +/- 0.23ºC (+/- 0.414ºF)
0ºC (32ºF): +/- 0.15ºC (+/- 0.27ºF)
71ºC (160ºF): +/- 0.292ºC (+/- 0.53ºF)
Din Standard | Temperature Coeffcient:
DIN EN 6075 (IEC 751) | 3850 ppm / ºC
Stability:
+/- 0.03% after 1000 Hours @ 300ºC (572ºF)
Response Time (63% Step Change):
25 Seconds nominal
Self-Heating | Maximum Operating Current:
100 Ohm RTD: 7 mW/ºC (Still Air) | 5 mA
1K Ohm RTD: 4mW/ºC (Still Air) | 3 mA
Operating Temperature Range:
-40 to 71ºC (-40 to 160ºF)
Operating Humidity Range:
10 to 95% RH, non-condensing
Plate Material:
A/100/1K-SP Series: 430 Stainless Steel (Brushed Stainless Steel Finish)
A/100/1K-AP Series: Aluminum (Smooth Satin Finish, Clear Anodized)
Foam Pad Material | Flammability Rating:
Cross-Linked Polyethylene | FMVSS-302
Lead Length | Conductor Size:
14” (35.56cm) | 22 AWG (0.65mm)
Lead Wire Insulation | Wire Rating:
Etched Teflon (PTFE) Colored Leads | MIL-W-16878/4 (Type E)
Conductor Material:
Silver Plated Copper
Product Dimensions:
4.50” (114.3mm) x 2.78” (70.6mm) x 0.187” (4.76mm)
Product Weight:
A/100/1K-SP Series: 0.15 lbs. (68.04g)
A/100/1K-AP Series: 0.09 lbs. (40.82g)
Agency Approvals:
CE, RoHS2, WEEE