This product is covered by ACI's Five (5) Year Limited Warranty. Learn more
Product overview
1,000 Ohm Balco RTD, Bullet Probe, 1"
Application
- Roof Top Units
- Discharge Air/Supply/Return/Mixed Air Duct Temperature
- Remote Temperature Sensing
Product specifications
Sensor Type:
Balco RTD
Sensor Curve:
PTC (Positive Temperature Coefficient)
Number Sensing Points:
One
Number Wires:
Two (Non-Polarity Sensitive)
Sensor Output @ 21.1ºC (70ºF):
1000 Ohms nominal
Lead Wire Colors:
Orange/Yellow
Sensor Accuracy:
70ºF (21.1ºC) : +/- 1%
Temperature Coefficient:
4618 ppm/ºC
Stability:
+/- 0.05% after 1000 Hours @ 150ºC (302ºF)
Response Time (63% Step Change):
8 Seconds nominal
Maximum Operating Current:
5 mA
Probe Material:
304 Stainless Steel
Operating Temperature Range:
-40 to 121ºC (-40 to 250ºF)
Storage Temperature Range:
-40 to 85ºC (-40 to 185ºF)
Operating Humidity Range:
10 to 95% RH, non-condensing
Lead Length | Conductor Size:
24” (61cm) | 22 AWG (0.65mm)
Lead Wire Insulation | Wire Rating:
Etched Teflon Colored Leads | MIL-W-16878/4 (Type E)
Conductor Material:
Silver Plated Copper
Product Dimensions:
1.00” (25.4mm) x 0.250” (6.35mm)
Product Weight:
0.02 lbs. (9.07g)
Agency Approvals:
CE, RoHS2, WEEE
