This product is covered by ACI's Five (5) Year Limited Warranty. Learn more
Product overview
1,000 Ohm Nickel RTD, Duct, Without Box, 18", 10' Plenum Cable
Application
- Roof Top Units
- Monitoring Supply/Discharge/Return/Mixed Air Temperatures
Product specifications
Sensor Type | Sensor Curve:
Nickel RTD | PTC (Positive Temperature Coefficient)
Number Sensing Points:
One
Number Wires:
Two (Non-Polarity Sensitive)
Sensor Output @ 21.1ºC (70ºF):
1000 Ohms nominal
Lead Wire Colors:
Red/Red
Sensor Accuracy:
-40ºC (-40ºF): +/- 1.52ºC (+/- 2.73ºF)
0ºC (32ºF): +/- 0.4ºC (+/- 0.72ºF)
21.1ºC (70ºF): +/- 0.17ºC (+/- 0.34ºF)
54.4ºC (130ºF): +/- 0.56ºC (1.00ºF)
121ºC (250ºF): +/- 1.25ºC (+/- 2.25ºF)
Din Standard | Temperature Coeffcient:
Din 43760 | 6370 ppm/ºC
Nickel RTD Stability:
+/- 0.05% after 1000 Hours @ 150ºC (302ºF)
Response Time (63% Step Change):
8 Seconds nominal
Operating Temperature Range:
-40 to 115ºC (-40 to 239ºF)
Storage Temperature Range:
-40 to 85ºC (-40 to 185ºF)
Operating Humidity Range:
10 to 95% RH, non-condensing
Probe Material | Flange Material:
304 Stainless Steel | Galvanized Steel
Fitting Material | Flammability Rating:
Polyamide 66 (High Performance Nylon) | UL94-HB
Foam Pad Material | Flammability Rating:
Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C
Lead Length | Conductor Size:
4”, 6” & 8” Probes: 14” (35.6 cm) | 12” & 18” Probes: 24” (61cm) | 22 AWG (0.65mm)
Lead Wire Insulation | Wire Rating:
Etched Teflon (PTFE) Colored Leads | MIL-W-16878/4 (Type E)
Conductor Material:
Silver Plated Copper
Probe Diameter:
0.250” (6.35mm)
Agency Approvals:
CE, RoHS2, WEEE